Hi all,
my homegear system received the homematic windows sensor but but dont paired.
have someone an idee.
i use the TI CC1100 Modul on RPI 3B+ - Raspian strech - Homegear version 0.8.0-2570
If i selected the familie device, like Familien select 0, the feedback : selected families Homematic bidcos dont Come.
What i did wrong: can someone Help me.
Hey Allen,
could you post the relevant part from your homematicbidcos.conf and the part from the log (/var/homegear/homegear.log) where homegear starts and when you try to pair your window sensor?
Cheers,
Patrik
Hi Patrik,
at first thank for your help.
homegear.log (15,3 KB)
homematicbidcos.conf.txt (3,0 KB)
cheers
Allen
Hey Allen,
from all I see the configuration looks ok.
Could you please provide a foto from you module and how you’ve connected it to your Pi?
Cheers,
Patrik
Hey Allen,
well, I know these modules… I’ve built them 
You are off by one Pin. Pin 1 of the Pi is where the SD-Card comes in.
See where the small notch is on the left of this picture? There’s Pin 1.
Or see here:
Cheers,
Patrik
Hi Patrik,
thanks for note,
after right conneting, it still have the same phenomen.
i still received the windows sensor but homegear dont paired 
cheers
allen
Hey Allen,
that “no feedback” is ok.
Did you enable SPI via raspi-config?
How far away is your window sensor while you try to pair?
Could you provide a log with loglevel 5 from the time you are trying to pair?
To change the Loglevel while homegear is running, you can type dl 5 in the homegear-console. dl 3 should be default.
Cheers,
Patrik
hi Patrik,
checked, the SPI-interface is enable.
the sensor is round about 10cm far from the pi.
log file dl 5:
homegear.log.txt (79,7 KB)
cheers
allen
Hey @Allen,
the CC1101 module seems to work fine. You are receiving packets as expected. The problem is, you are trying to pair a HomeMatic IP device. That is not supported by the module. Only HomeMatic BidCoS devices work. Currently to use HomeMatic IP you need a CCU or RaspberryMatic.
Cheers,
Sathya
Hi Sathya,
thk for your support.
the clues is super.
I try to connected is with the max windows sensor and it work.
incredibly.
once again, thk for your support.
cheers
allen
