___________________________________________________________________________

---------------------------- HomeMatic BidCoS  ----------------------------
___________________________________________________________________________

#######################################
### HomeMatic Wireless LAN Gateway  ###
#######################################

## The device family this interface is for
[HomeMaticBidCoS]

## Specify an unique id here to identify this device in Homegear
id = HM-LGW-KI

## When default is set to "true" Homegear will assign this device
## to new peers.
default = true

## Options: cul, cc1100, coc, cuno, hmcfglan, hmlgw
deviceType = hmlgw

## IP address of your HM-LGW
host = 192.168.0.26

## First Port number your HM-LGW listens on. Normally 2000.
port = 2000

## Keep alive port number your HM-LGW listens on. Normally 2001.
portKeepAlive = 2001

## Put the security key printed on your HM-LGW here
lanKey = 8LxtPEBJzX

## Specify a 16 byte (32 characters) long AES key here to protect your wireless communication
## !!! IMPORTANT: Never ever lose this key. That would render your devices useless.
## To remove the key from your devices, you need to factory reset them
rfKey = F43AADBF5285890DFDC194CBC5D0B106

## With each key change currentRFKeyIndex needs to be
## incremented by 1
currentRFKeyIndex = 1

## When you change rfKey, put the old key here. To change the key Homegear needs to know the
## old and the new one.
## !!! Do not set oldRFKey when you set rfKey for the first time !!!
#NOTE: rfKey is MD5(ccu_sicherheitsschluessel)
##oldRFKey = F43AADBF5285890DFDC194CBC5D0B106

## Default: responseDelay = 95
## Should be "95" for CUL or COC, "100" for TI CC1101 and "60" for HM-CFG-LAN or HM-LGW
responseDelay = 60


#############################################
## The device family this interface is for
[HomeMaticBidCoS]

## Specify an unique id here to identify this device in Homegear
id = HM-LGW-SR

## When default is set to "true" Homegear will assign this device
## to new peers.
##default = true

## Options: cul, cc1100, coc, cuno, hmcfglan, hmlgw
deviceType = hmlgw

## IP address of your HM-LGW
host = 192.168.0.25
#host = 192.168.0.1

## First Port number your HM-LGW listens on. Normally 2000.
port = 2000

## Keep alive port number your HM-LGW listens on. Normally 2001.
portKeepAlive = 2001

## Put the security key printed on your HM-LGW here
lanKey = 7+k*QG+B!y

## Specify a 16 byte (32 characters) long AES key here to protect your wireless communication
## !!! IMPORTANT: Never ever lose this key. That would render your devices useless.
## To remove the key from your devices, you need to factory reset them
rfKey = F43AADBF5285890DFDC194CBC5D0B106

## With each key change currentRFKeyIndex needs to be
## incremented by 1
currentRFKeyIndex = 1

## When you change rfKey, put the old key here. To change the key Homegear needs to know the
## old and the new one.
## !!! Do not set oldRFKey when you set rfKey for the first time !!!
#NOTE: rfKey is MD5(ccu_sicherheitsschluessel)
##oldRFKey = F43AADBF5285890DFDC194CBC5D0B106

## Default: responseDelay = 95
## Should be "95" for CUL or COC, "100" for TI CC1101 and "60" for HM-CFG-LAN or HM-LGW
responseDelay = 60



___________________________________________________________________________

------------------------------- Philips hue -------------------------------
___________________________________________________________________________

#######################################
############# Hue Bridge  #############
#######################################

## The device family this interface is for
#[PhilipsHue]

## Specify an unique id here to identify this device in Homegear
## This identifier is also used as the bridge user name and "password".
#id = My-Hue-Bridge

## Options: huebridge
#deviceType = huebridge

## IP address of your bridge
#host = 192.168.0.22

## Port number your bridge listens on. Normally 80.
#port = 80

## Should be "100" for Philips hue
#responseDelay = 100